• 本帖最后由 MarkZuckerberg 于 2012-6-3 11:19 编辑 *

"- [root@server ~]# smartctl -a /dev/sda

  • smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
  • Home page is ttp://smartmontools.sourceforge.net/
  • - === START OF INFORMATION SECTION ===
  • Device Model: ST1000DM003-9YN162
  • Serial Number: W1D0WRTT
  • Firmware Version: CC4D
  • User Capacity: 1,000,204,886,016 bytes
  • Device is: Not in smartctl database [for details use: -P showall]
  • ATA Version is: 8
  • ATA Standard is: ATA-8-ACS revision 4
  • Local Time is: Sun Jun 3 05:19:46 2012 CEST
  • SMART support is: Available - device has SMART capability.
  • SMART support is: Enabled
  • - === START OF READ SMART DATA SECTION ===
  • SMART overall-health self-assessment test result: PASSED
  • - General SMART Values:
  • Offline data collection status: (0x00) Offline data collection activity
  • was never started.
  • Auto Offline Data Collection: Disabled.
  • Self-test execution status: ( 0) The previous self-test routine completed
  • without error or no self-test has ever
  • been run.
  • Total time to complete Offline
  • data collection: ( 575) seconds.
  • Offline data collection
  • capabilities: (0x73) SMART execute Offline immediate.
  • Auto Offline data collection on/off support.
  • Suspend Offline collection upon new
  • command.
  • No Offline surface scan supported.
  • Self-test supported.
  • Conveyance Self-test supported.
  • Selective Self-test supported.
  • SMART capabilities: (0x0003) Saves SMART data before entering
  • power-saving mode.
  • Supports SMART auto save timer.
  • Error logging capability: (0x01) Error logging supported.
  • General Purpose Logging supported.
  • Short self-test routine
  • recommended polling time: ( 1) minutes.
  • Extended self-test routine
  • recommended polling time: ( 115) minutes.
  • Conveyance self-test routine
  • recommended polling time: ( 2) minutes.
  • SCT capabilities: (0x3085) SCT Status supported.
  • - SMART Attributes Data Structure revision number: 10
  • Vendor Specific SMART Attributes with Thresholds:
  • ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  • 1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 54427552
  • 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
  • 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 24
  • 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  • 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 312202
  • 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 53
  • 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  • 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 24
  • 183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  • 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
  • 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  • 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
  • 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  • 190 Airflow_Temperature_Cel 0x0022 062 048 045 Old_age Always - 38 (Lifetime Min/Max 34/40)
  • 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  • 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 23
  • 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 51
  • 194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 26 0 0)
  • 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  • 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  • 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  • 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 69788923592748
  • 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 73669293185
  • 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 186694490553
  • - SMART Error Log Version: 1
  • No Errors Logged
  • - SMART Self-test log structure revision number 1
  • Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  • # 1 Short offline Completed without error 00% 14 -
  • # 2 Short offline Completed without error 00% 8 -
  • # 3 Short offline Completed without error 00% 8 -
  • # 4 Short offline Completed without error 00% 7 -
  • # 5 Short offline Completed without error 00% 0 -
  • - SMART Selective self-test log data structure revision number 1
  • SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  • 1 0 0 Not_testing
  • 2 0 0 Not_testing
  • 3 0 0 Not_testing
  • 4 0 0 Not_testing
  • 5 0 0 Not_testing
  • Selective self-test flags (0x0):
  • After scanning selected spans, do NOT read-scan remainder of disk.
  • If Selective self-test is pending on power-up, resume after 0 minute delay.复制代码怎么这么慢?