- winder2011-05-03论坛元老697
刚到处晃悠发现的,求加分
- Download the script to your server. We provide pre-configured variants of the script to just work "out of the box" on your VPS. Choose the appropriate script and run the following command as root.
no panel ports
wget -O /etc/init.d/firewall http://vpsinfo.nixhost.net/firewall.vps
cpanel specific ports opened
wget -O /etc/init.d/firewall http://vpsinfo.nixhost.net/firewall.cpanel.vps
DirectAdmin specific ports opened
wget -O /etc/init.d/firewall http://vpsinfo.nixhost.net/firewall.directadmin.vps
Plesk specific ports opened
wget -O /etc/init.d/firewall http://vpsinfo.nixhost.net/firewall.psa.vps
This is where the security concious will not take our word for anything and thoroughly read the script first. Go ahead, we'll wait.
- Make it executable
chmod +x /etc/init.d/firewall
- Configure it to start at boot
/sbin/chkconfig firewall on
- Start it.
/sbin/service firewall start
or
/etc/init.d/firewall start- See the rules
/sbin/service firewall status- #!/bin/bash
- - #
- # firewall This shell script takes care of setting up a firewall for a virtuosso based VPS
- # (no stateful rules/connection tracking or logging.
- # Borrows heavily from a script by Dmitry Konstantinov of sw-soft
- #
- #
- # chkconfig: 2345 18 92
- # description: setup firewall configuration
- - IPTABLES="/sbin/iptables"
- SERVER_IPS=
/sbin/ifconfig | grep inet | cut -d : -f 2 | cut -d \ -f 1 | grep -v 127.0.0.1 - - FWIN="${IPTABLES} -A INPUT"
- FWOUT="${IPTABLES} -A OUTPUT"
- OK="-j ACCEPT"
- NO="-j DROP"
- - - # Flush tables and change default policy to DROP
- function initialize() {
- local TABLE="${1}"
- ${IPTABLES} -F ${TABLE}
- ${IPTABLES} -P ${TABLE} DROP
- }
- - # Flush tables and change default policy to ACCEPT
- function stop() {
- local TABLE="${1}"
- ${IPTABLES} -F ${TABLE}
- ${IPTABLES} -P ${TABLE} ACCEPT
- }
- - # Verify call switch
- case "$1" in
- start|restart)
- - initialize INPUT
- initialize OUTPUT
- initialize FORWARD
- - # INPUT
- # 1) loopback
- ${FWIN} -i lo ${OK}
- ${FWIN} -d 127.0.0.0/8 ${NO}
- - # 2) We allow incoming SSH connections and answers to
- # our own SSH connections:
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p tcp -d ${OURIP} --dport 22 ${OK}
- ${FWIN} -p tcp --sport 22 -d ${OURIP} "!" --syn ${OK}
- done
- - # 3) We allow incoming DNS queries as well as answers to our
- # DNS queries.
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p tcp -d ${OURIP} --dport 53 ${OK}
- ${FWIN} -p udp -d ${OURIP} --dport 53 ${OK}
- ${FWIN} -p tcp --sport 53 -d ${OURIP} --dport 1024: "!" --syn ${OK}
- ${FWIN} -p udp --sport 53 -d ${OURIP} --dport 1024: ${OK}
- done
- - # 4) We allow access to our SMTP server, as well as answers
- # to our SMTP connections and, temporarily, identd stuff:
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p tcp -d ${OURIP} --dport 25 ${OK}
- ${FWIN} -p tcp --sport 25 -d ${OURIP} --dport 1024: "!" --syn ${OK}
- ${FWIN} -p tcp --sport 1024: -d ${OURIP} --dport 113 ${OK}
- #${FWIN} -p udp --sport 1024: -d ${OURIP} --dport 113 ${OK}
- ${FWIN} -p tcp --sport 113 -d ${OURIP} --dport 1024: "!" --syn ${OK}
- #${FWIN} -p udp --sport 113 -d ${OURIP} --dport 1024: ${OK}
- done
- - # 5) We also allow access to our POP/sPOP server.
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p tcp -d ${OURIP} --dport 110 ${OK}
- ${FWIN} -p tcp -d ${OURIP} --dport 995 ${OK}
- done
- - # 6) and to IMAP/IMAPs
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p tcp -d ${OURIP} --dport 143 ${OK}
- ${FWIN} -p tcp -d ${OURIP} --dport 993 ${OK}
- done
- - # 7) we would like to be able to use lynx ;)
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p tcp --sport 80 -d ${OURIP} --dport 1024: "!" --syn ${OK}
- done
- - # 8) We allow incoming echo replies/requests from everywhere:
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p icmp -d ${OURIP} --icmp-type 0 ${OK}
- ${FWIN} -p icmp -d ${OURIP} --icmp-type 3 ${OK}
- ${FWIN} -p icmp -d ${OURIP} --icmp-type 8 ${OK}
- ${FWIN} -p icmp -d ${OURIP} --icmp-type 11 ${OK}
- done
- - # 9) We also would like to allow access to our web server:
- for OURIP in ${SERVER_IPS}; do
- ${FWIN} -p tcp -d ${OURIP} --dport 80 ${OK}
- ${FWIN} -p tcp -d ${OURIP} --dport 443 ${OK}
- done
- - # 10) people are still crazy enough to use ftp
- for OURIP in ${SERVER_IPS}; do
- for PORT in 20 21; do
- ${FWIN} -p tcp -d ${OURIP} --dport ${PORT} ${OK}
- ${FWIN} -p tcp --sport ${PORT} -d ${OURIP} --dport 1024: "!" --syn ${OK}
- ${FWIN} -p udp -d ${OURIP} --dport ${PORT} ${OK}
- ${FWIN} -p udp --sport ${PORT} -d ${OURIP} --dport 1024: ${OK}
- done
- done
- - # allow answers on high ports
- ${FWIN} -p tcp -m tcp --dport 1024:65535 ! --tcp-flags SYN,RST,ACK SYN -j ACCEPT
- ${FWIN} -p udp -m udp --dport 1024:65535 -j ACCEPT
- - # passive ftp
- # configure ftp server to allow passive ftp on ports outside of
- # the local range. Check local range with
- # cat /proc/sys/net/ipv4/ip_local_port_range
- #
- # for pure-ftpd, use --passiveportrange 61001:65535 in
- # /etc/sysconfig/pure-ftpd
- #
- # for proftpd use PassivePorts 61001 65535
- # in /etc/proftpd.conf
- #
- #${FWIN} -p tcp -m tcp --dport 61001:65535 ${OK}
- - # Everything else is denied by default - policy is DROP.
- - # OUTPUT
- # 1) Loopback packets.
- ${FWOUT} -o lo ${OK}
- ${FWOUT} -s 127.0.0.0/8 ${NO}
- - # 2) We allow all outgoing traffic:
- for OURIP in ${SERVER_IPS}; do
- ${FWOUT} -s ${OURIP} ${OK}
- done
- - ;;
- - stop)
- # turn off the firewall, flush all rules
- echo "Flushing rulesets.."
- - stop INPUT
- stop OUTPUT
- stop FORWARD
- - ;;
- - status)
- # display the current status - both firewall rules and masquerading
- # connections
- - # list rules. -n avoids DNS lookups
- $IPTABLES -nL
- - ;;
- - *)
- echo "Usage: firewall {start|stop|restart|status}"
- exit 1
- esac
- - exit 0复制代码
[ 本帖最后由 winder 于 2011-5-3 17:46 编辑 ]