• fdisk -l
  • - Disk /dev/xvdb: 10.7 GB, 10737418240 bytes
  • 255 heads, 63 sectors/track, 1305 cylinders
  • Units = cylinders of 16065 * 512 = 8225280 bytes
  • - Device Boot Start End Blocks Id System
  • /dev/xvdb3 1 1305 10482381 8e Linux LVM
  • - Disk /dev/xvda: 10.7 GB, 10737418240 bytes
  • 255 heads, 63 sectors/track, 1305 cylinders
  • Units = cylinders of 16065 * 512 = 8225280 bytes
  • - Device Boot Start End Blocks Id System
  • /dev/xvda1 * 1 13 104391 83 Linux
  • /dev/xvda2 14 1044 8281507+ 8e Linux LVM
  • /dev/xvda3 1045 1305 2096482+ 8e Linux LVM
  • 复制代码可用的只有9.3G,剩下的如何挂载?- fdisk /dev/xvdb
  • - The number of cylinders for this disk is set to 1305.
  • There is nothing wrong with that, but this is larger than 1024,
  • and could in certain setups cause problems with:
  • 1) software that runs at boot time (e.g., old versions of LILO)
  • 2) booting and partitioning software from other OSs
  • (e.g., DOS FDISK, OS/2 FDISK)
  • - Command (m for help):
  • [root@MyVPS ~]# fdisk /dev/xvda
  • - The number of cylinders for this disk is set to 1305.
  • There is nothing wrong with that, but this is larger than 1024,
  • and could in certain setups cause problems with:
  • 1) software that runs at boot time (e.g., old versions of LILO)
  • 2) booting and partitioning software from other OSs
  • (e.g., DOS FDISK, OS/2 FDISK)
  • - Command (m for help):
  • 复制代码

[ 本帖最后由 youling 于 2011-8-5 01:08 编辑 ]