- tyk2016-06-25高级会员85894
- 本帖最后由 tyk 于 2016-6-25 09:28 编辑 *
System Info
Processor : Intel(R) Core(TM) i5-3570S CPU @ 3.10GHz
CPU Cores : 4
Frequency : 3093.207 MHz
Memory : 15915 MB
Swap : 15998 MB
Uptime : 26 min,OS : CentOS release 6.6 (Final)
Arch : x86_64 (64 Bit)
Kernel : 2.6.32-642.1.1.el6.x86_64
Hostname :Speedtest (IPv4 only)
Your public IPv4 is
Location Provider Speed
CDN Cachefly 11.3MB/sAtlanta, GA, US Coloat 2.34MB/s
Dallas, TX, US Softlayer 9.78MB/s
Seattle, WA, US Softlayer 5.47MB/s
San Jose, CA, US Softlayer 5.32MB/s
Washington, DC, US Softlayer 1.78MB/sTokyo, Japan Linode 5.70MB/s
Singapore Softlayer 4.12MB/sRotterdam, Netherlands id3.net 9.86MB/s
Haarlem, Netherlands Leaseweb 11.2MB/sDisk Speed
I/O (1st run) : 155 MB/s
I/O (2nd run) : 164 MB/s
I/O (3rd run) : 153 MB/s
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.1.1.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===
Device Model: HGST HUS726020ALA610
Serial Number: K5G094MA
LU WWN Device Id: 5 000cca 25ec02258
Firmware Version: A5GNT920
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Jun 25 03:10:33 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 113) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 288) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 4
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 9
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 4
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 4
194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 25/38)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0SMART Error Log Version: 1
No Errors LoggedSMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error1 Short offline Completed without error 00% 7 -
2 Short offline Completed without error 00% 0 -
3 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.