• 本帖最后由 CheapLolicon 于 2018-6-20 22:23 编辑 *

2018年6月18日 01:11:43
破除限速方法到这里 http://www.hostloc.com/forum.php ... 601&pid=5578467
。
等了三天sys验证总算回复了,不愧没白等,居然通过了

然后立即剁手,付款完,2分钟上架,很快,看来库存很够
于是来水一下贴

  • ----------------------------------------------------------------------
  • CPU model : ARMv7 Processor rev 1 (v7l)
  • Number of cores : 2
  • CPU frequency : MHz
  • Total size of Disk : 1903.4 GB (45.9 GB Used)
  • Total amount of Mem : 2019 MB (1600 MB Used)
  • Total amount of Swap : 4094 MB (6 MB Used)
  • System uptime : 0 days, 3 hour 2 min
  • Load average : 0.13, 0.35, 0.46
  • OS : Debian GNU/Linux 8
  • Arch : armv7l (32 Bit)
  • Kernel : 4.9.58-armada375
  • ----------------------------------------------------------------------
  • I/O speed(1st run) : 173 MB/s
  • I/O speed(2nd run) : 186 MB/s
  • I/O speed(3rd run) : 184 MB/s
  • Average I/O speed : 181.0 MB/s
  • ----------------------------------------------------------------------
  • Node Name IPv4 address Download Speed
  • CacheFly 205.234.175.175 27.7MB/s
  • Linode, Tokyo, JP 106.187.96.148 3.55MB/s
  • Linode, Singapore, SG 139.162.23.4 1.89MB/s
  • Linode, London, UK 176.58.107.39 34.7MB/s
  • Linode, Frankfurt, DE 139.162.130.8 27.5MB/s
  • Linode, Fremont, CA 50.116.14.9 1.08MB/s
  • Softlayer, Dallas, TX 173.192.68.18 11.2MB/s
  • Softlayer, Seattle, WA 67.228.112.250 7.96MB/s
  • Softlayer, Frankfurt, DE 159.122.69.4 42.8MB/s
  • Softlayer, Singapore, SG 119.81.28.170 5.33MB/s
  • Softlayer, HongKong, CN 119.81.130.170 5.59MB/s
  • ----------------------------------------------------------------------
  • root@SYS-ARM-2T-01:~# smartctl -A /dev/sda
  • smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.9.58-armada375] (local build)
  • Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  • - === START OF READ SMART DATA SECTION ===
  • SMART Attributes Data Structure revision number: 16
  • Vendor Specific SMART Attributes with Thresholds:
  • ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  • 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  • 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 108
  • 3 Spin_Up_Time 0x0007 162 162 024 Pre-fail Always - 200 (Average 168)
  • 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 122
  • 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  • 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  • 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
  • 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 6458
  • 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  • 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 122
  • 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 925
  • 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 925
  • 194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 19/47)
  • 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  • 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  • 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  • 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0复制代码

先来下没什么卵用的测试
硬盘6k小时,可以的

之后就来下正题,关于单线程限速
先来总结一下,直接Nginx 确实单线程限速5Mbit/s,需要5/10+线程下载才不会限速
但开个Docker 并安装Nginx,没有限速

个人感觉应该是sys的系统模版有毒,最大可能性还是那个改不了的内核
另外这sys丫的,连IPv6也弄不支持,内核限制了……点点点

不过换个角度来思考,毕竟才5欧的玩具,能有250Mpbs保证带宽?还是有点想得太美了
但不管怎么说这单线程限速的做法还是太恶心了,多线程虽能破,但这U……16线程下去都20%,点点点