• 本帖最后由 ㄒiger 于 2012-2-27 21:30 编辑 *

![](014.gif)
大牛们 告诉下。这个必须服务器支持啥可以正常运行。。

sentris的机器。我正在重装..好像可以 ~~~~.. VPS的不知道行不行。。。

11210

Assuming you currently have a Centos 5 64-bit that was installed by us (if you have or want 32-bit, set/use 32-bit accordingly).

Below will reinstall to Centos 5.6 64-bit, change it accordingly if you want other versions of centos.

  1. SSH to your server and login as root
  1. Type below:

mkdir /centos_install
cd /centos_install
wget http://vault.centos.org/5.6/os/x86_64/images/pxeboot/initrd.img
wget http://vault.centos.org/5.6/os/x86_64/images/pxeboot/vmlinuz
cp vmlinuz /boot/vmlinuz.cent.pxe
cp initrd.img /boot/initrd.img.cent.pxe3. Add to/Edit the grub menu.lst entry to load the pxe kernel (note: if you were already using grub you do not need to type again the first 2 lines)nano -w /etc/grub.conf

in that file paste this in BETWEEN "hiddenmenu" and "title CentOS..." (IMPORTANT):

title Centos Install (PXE)
root (hd0,0)
kernel /vmlinuz.cent.pxe vnc vncpassword=YOURPSW headless ip=YOURIP netmask=255.255.255.0 gateway=GATEWAYIP dns=8.8.8.8 ksdevice=eth0 method=http://vault.centos.org/5.6/os/x86_64/ lang=en_US keymap=us
initrd /initrd.img.cent.pxe

replace

YOURPSW with the VNC password you want setup
YOURIP with the ip of the box…
GATEWAYIP with the gateway assigned to your box

Hint: you can see the gateway ip by issuing

route -n | grep UG
once you have done this you need to count the number of times “title” appears in the file, press ctrl +x, and save the file

  1. Reboot the server by typing

reboot

  1. Assuming above is done correctly, you can then use vncviewer (download from realvnc.com) and connect to YOURIPHERE:1

And password is whatever you set above.

For Centos 6.2 64-bit, you can use this:

mkdir /centos_install
cd /centos_install
wget http://linux.mirrors.es.net/centos/6.2/os/x86_64/images/pxeboot/initrd.img
wget http://linux.mirrors.es.net/centos/6.2/os/x86_64/images/pxeboot/vmlinuz
cp vmlinuz /boot/vmlinuz.cent.pxe
cp initrd.img /boot/initrd.img.cent.pxe

title Centos Install (PXE)
root (hd0,0)
kernel /vmlinuz.cent.pxe vnc vncpassword=YOURPSW headless ip=YOURIP netmask=255.255.255.0 gateway=GATEWAYIP dns=8.8.8.8 ksdevice=eth0 method=http://linux.mirrors.es.net/centos/6.2/os/x86_64/ lang=en_US keymap=us
initrd /initrd.img.cent.pxe